Filter
Top Products
11
1. Place the appliance on a flat, dry surface
and plug the supply cord into a standard
electrical outlet.
2. Canisters: place the item(s) to be vacuum
packaged inside the canister. Place the
lid on top of the canister. See figure 1.
Bottle Stoppers: insert the Bottle Stopper
into the neck of the bottle.
Leave at least 2.5cm between the
contents and the rim. See figure 2.
3. Insert one end of the Accessory Hose
into the Accessory Port on the appliance.
Insert the other end of the hose into the
lid of canister or bottle stopper.
4. Press Vacuum & Seal button.
5. Motor will run until vacuum process is
complete.
6. When motor turns off, gently twist and
remove Accessory Hose from appliance
and canister or bottle stopper.
Deli Containers:
1. Place the item(s) to be vacuum packaged
inside the container*. Place the lid firmly
on top of the container.
2. Insert one end of the Accessory Hose into
the Accessory Port on your FoodSaver®
appliance.
3. Insert the other end of the Accessory
Hose into the hole on the top of the
container adaptor. See figure 3. Twist the
grey tip of hose while inserting to ensure
a tight fit.
Figure 1
Figure 2
How to Vacuum Package using FoodSaver
®
Canisters, Bottle Stoppers and Deli Containers
Figure 3