Filter
Top Products
12
How to Vacuum Package using FoodSaver
®
Canisters,
Bottle Stoppers and Deli Containers - Continued
4. Place the container adaptor over the grey
vacuum valve on the container lid.
See figure 4.
5. Press Vacuum and Seal button.
6. Motor will run until vacuum process is
complete.
7. When motor turns off, gently twist and
remove Accessory Hose from appliance
and container.
Important: After vacuum packaging, put deli
container in refrigerator or freezer. Allow hot
foods to cool to room temperature before
vacuum packaging. Otherwise, the contents
may bubble up out the container.
HowtoOpentheFoodSaver
®
Canister
To open, press and hold down the grey rubber
button in the centre of the lid. This will
release the vacuum – a hissing sound can
be heard as the air rushes in.
How to Remove the FoodSaver
®
Bottle Stopper
To remove, simply twist and pull up on the
Bottle Stopper to release the vacuum.
HowtoOpenFoodSaver
®
Deli containers
To open, lift the grey rubber cover in the
centre of the lid. This will release the vacuum
– a hissing sound can be heard as the air
rushes is.
*FoodSaver
®
Deli containers sold separately.
IMPORTANT:Remember to remove the
Accessory Hose from the Accessory Port on
the appliance before you vacuum package in
FoodSaver® Bags.
DONOTSTORECANISTERINTHEFREEZER.
Figure 4