Filter
Top Products
Tips on Removing Air from a Bag
Make sure you've locked the appliance
lid. When vacuuming and sealing a bag
or canister, ensure latch is locked in the
'operate' position.
Check for wrinkles in the bag along the Sealing
Strip. Wrinkles in seal may cause leakage and
allow air to come back into bag. Check for
wrinkles in bag along Sealing Strip before
closing lid and vacuum packaging. If you
find wrinkles after sealing bag, simply cut
bag open and vacuum package again.
If motor runs for more than 30 seconds without
stopping, consider the following: You may
need to adjust bag and try again. If you are
making the initial seal on a piece of bag
material with two open ends, make sure bag
is placed on Sealing Strip. If you are vacuum
packaging with a bag, make sure open end is
placed over the Vacuum Channel and make
sure Accessory Hose is not attached.
Using your FoodSaver
®
VAC780 continued
12