Filter
Top Products
1. Place the appliance on a flat, dry surface
and plug the supply cord into a standard
electrical outlet.
2. Canisters: place the item(s) to be vacuum
packaged inside the canister. Place the lid
on top of the canister*. See figure 1.
Bottle Stoppers: insert the Bottle Stopper
into the neck of the bottle.
Leave at least 2.5cm between the contents
and the rim. See figure 2.
3. Insert one end of the Accessory Hose into
the Accessory Port on the appliance. Insert
the other end of the hose into the lid of
canister or bottle stopper.
4. Lock the latch on the side to the 'operate'
position before vacuuming.
5. Press 'Canister' Button to begin vacuum
process for either canisters or bottles,
motor will run until vacuum process
is complete.
6. When light indicator turns off, gently twist
and remove Accessory Hose from appliance
and canister or bottle stopper.
How to Open the FoodSaver
®
Canister
To open, press and hold down the grey rubber
button in the center of the lid. This will
release the vacuum – a hissing sound can
be heard as the air rushes in.
* FoodSaver
®
Canisters sold separately.
How to Remove the FoodSaver
®
Bottle Stopper
To remove, simply twist and pull up on the
Bottle Stopper to release the vacuum.
IMPORTANT: Remember to remove the Accessory
Hose from the Accessory Port on the appliance
before you vacuum package in FoodSaver
®
Bags.
DO NOT STORE CANISTER IN THE FREEZER.
How to Vacuum Package using
FoodSaver
®
Canisters and Bottle Stoppers
Figure 1
Figure 2
13