Filter
Top Products
15
To Remove and Replace Storage Drawer (some models)
To Remove the Drawer
1. Pull the empty drawer out to the roller guide stop.
2. Tilt the drawer up and pull it out over the rollers.
To Replace the Drawer
1. Insert the rear end of the drawer into the opening.
2. Fit the drawer end rollers onto the guide rails.
3. Push the drawer in until it stops; lift to allow the rollers to clear the roller guide stop;
push in.
To Remove and Replace Decorative Drawer Front Panel (some models)
1. To remove decorative front panel, insert fingers in top groove and pull out to disengage
from clips.
2. To replace, first align slots of decorative front panel with clips located at bottom of range
and push back into its original position.
Storage
Drawer
Roller
Front Frame
Rails