Tappan TDT4030B Dishwasher User Manual


 
Normal Wash Cycle:
• This is used for regular loads for medium soiled dishware, silverware and glassware. The total time for
"Wash Only" cycle is approximately 27 minutes. When "Dry Cycle" is selected, the total time for the
whole cycle will be approximately 42 minutes.
Heavy Wash Cycle:
• This cycle is used for heavily soiled dishware, glassware, silverware and pots & pans, and cookware with
dried soils. The total time for "Wash Only" cycle is approximately 42 minutes. When "Dry Cycle" is
selected, the total time for the whole cycle will be approximately 53 minutes.
Rinse & Hold Cycle:
• This cycle is used for rinsing partial loads that will be washed later. The total wash time for "Wash Only"
cycle is approximately 6 minutes.
Note: Do not use detergent with this cycle.
Vented Dry (On/Off):
• You can select this option at the beginning of the wash cycle to dry your dishware items. Press the
button in to have vented dry option "On" or press the out to have vented dry option "Off".
Note: When selecting any of the above cycles or options, you will see the following:
. • It will take approximately 60 seconds to begin the wash cycle.
. • In wash mode, light will come on indicating that wash cycle is selected.
. • In dry mode, light will come on indicating that dry cycle is selected.
. • The buzzer will beep at the end of the cycle indicating that cycle is completed.
Warning: When you leave the door open to air dry those washed items, make sure there are no
children around to go near the dishwasher to climb over. If there are children around near
the dishwasher, pay careful attention and observation toward children.
12