![](http://pdfasset.owneriq.net/0/b5/0b55e4a6-f4a5-4438-8a79-6d5acc79ac77/0b55e4a6-f4a5-4438-8a79-6d5acc79ac77-bg11.png)
13
Model 390 Operating Procedures
Disassembly
BE SURE THE CONTROL SWITCH IS IN
THE “OFF” POSITION. Failure to do so may cause
injury from electrocution or hazardous moving parts.
Step 1
Remove the handscrews, freezer door, baffle
assembly, beater assembly, scraper blades, and drive
shaft from the freezing cylinder. Take these parts to the
sink for cleaning.
Step 2
Remove the front drip tray and splash shield and take
them to the sink for cleaning.