Groupe SEB USA - T-FAL FIT'N CLEAN Kitchen Grill User Manual


 
Thank you for buying this appliance, which is intended for
domestic use only.Read the instructions in this leaflet carefully
and keep them within reach. They apply to every version
depending on the accessories that come with your appliance.
TEFAL has an ongoing policy of research and development and may modify
these products without prior notice.
Assembly
Before you use your appliance for the first time:
• Remove all packaging materials, stickers and accessories
from the inside and the outside of the appliance.
Wash the grill plates and the two drip trays: follow the
instructions in the paragraph "After use/cleaning".
Ensure that all parts are completely dry before assembling them.
The heating element terminals (1) of the upper (2) and lower (3)
sections of the appliance must always be dried thoroughly
before using the appliance.
If the red waterproof caps on the element terminals (1) are
damaged (torn, cut…) and/or if the element terminals (1) are
damaged (bent…), they should be repaired by our authorised
service dealer or a similarly qualified person to avoid any
danger.
Place your appliance on a flat, stable and heat-resistant surface.
Avoid using it on a soft surface such as an oilcloth.
Never place the appliance directly on a fragile surface (glass
table, tablecloth, varnished furniture, etc.).
Never place the appliance under a cupboard attached to a wall
or a shelf or next to inflammable materials such as blinds,
curtains or wall hangings.
To prevent the appliance from overheating, do not place it in a
corner or against a wall.
Place the upper section (3) of the appliance flat onto the lower
section (2).
The two sections must be perfectly lined up, flat against each
other.
RC 301 520 920 – Ref. 2016231.240 – 10/04
Fit'nClean Eng-Ara 10/04 28/10/04 16:03 Page 2