Filter
Top Products
Position the rectangular drip tray (6) by sliding it under the lower
grill plate (2).
Position the second drip tray (7) on the handle (8) of the
appliance, sliding it under the upper grill plate (3).
Make sure that the power cord and cable linking the two electric
units do not get in the way.
For the oven function (according to model)
To warm up cooked dishes whether fresh or frozen
(quiches, crêpes, sandwiches with cheese topping, etc.)
and grill fragile foods (such as fish, brochettes, etc.),
without crushing them.
Note: cooking pizzas and cheese-topped dishes is not
recommended.
Put the support wire (9) in place, by inserting it in the holes
located on each side of the lower section (2) of the appliance:
insert the longer end on the left, then the shorter one on the
right.
It is normal to have to slightly stretch the support wire (9) to
insert it into the lower section of the appliance (2).
Open the grill.
Swing the support wire (9) forward to lift up the lower section (2)
of the appliance: the grill plate is then in a horizontal position.
Grasp the handle (8), pull up vigorously on the upper section (3)
of the appliance, then pull it towards you until you can slide it
onto the front notch and close the appliance by letting the upper
section (3) rest on the support wire (9): the two grill plates are
now parallel; the appliance is in the oven position.
Connection and pre-heating
Fully unwind the power cord.
Make sure that the electric power supply is compatible with the
power rating and voltage indicated on the bottom of the
appliance.
Always plug the appliance into an earthed socket.
Fit'nClean Eng-Ara 10/04 28/10/04 16:03 Page 4