Filter
Top Products
GB
33
The cookware is inadequate
(it doesn't have a ferromagne-
tic base or it is too small).
Make sure that the base of
the cookware is attracted by
a magnet or use larger cook-
ware.
FOR MODELS IRX… AND IQX...
The induction zones don't get hot
There is a coupling of
energy between the diffe-
rent induction zones.
It is not a defect. Try chan-
ging the chosen power
levels.
I hear whistle-like sounds when two or more induction zones are activated at
high power levels
No heating element has
been chosen.
Make sure to choose a heating
element using the element.
The lock is activated.
Deactivate the lock.
The sensors are wet and/or
your fingers are wet.
Keep the surface of the
touch control panel and/or
your fingers dry and clean.
The sound of a fan can be heard when cooking and the sound continues
after the cooker has been turned off.
The induction zones have a
fan that cools the electronic
system.
The fan only works when the
temperature of the electronic
system is high; when the tem-
perature decreases, the fan
turns off automatically regar-
dless of whether or not the
cooker is activated.
When frying or cooking stew, it seems as though the energy of the
induction zones decreases ("the induction element heats less")
If the temperature of the glass
or of the electronic system
becomes too high while coo-
king, an auto-protection
system will begin working
which regulates the power of
the heating elements so that
the temperature does not con-
tinue increasing.
Excess temperature problems
during cooking only occur in
extreme situations (an exten-
ded period of time cooking at
maximum power) or when ins-
tallation is inadequate.
Verify that installation has
been done in accordance with
the indications in the instruc-
tions manual.
The touch control panel doesn't go on or, if it's on, it doesn't respond
Problem Possible cause Solution