Filter
Top Products
CET/CEP Cooktop Care and Use Manual
• Remove all packing materials and literature from
the cooktop surface.
• While cool, wipe with a clean, damp sponge and
dry.
• Apply the Cooktop Cleaning Creme
®
packaged
with the cooktop. Buff with a clean cloth. (See Page
14 for daily care instructions.)
• There may be a slight odor during the first several
uses; this is normal and will disappear.
• Optimum cooking results depend on the proper
cookware being selected and used. (See Page 12.)
• The cooking surface will hold the heat and remain
hot up to 25 or 30 minutes after the elements
have been turned off.
• Read all safety precautions and Care & Use Manual
information prior to operating.
PRECAUTIONS
FOR
LONG
LIFE
AND
GOOD
APPEARANCE
OF
THE
SURFACE:
• Regular, daily care using the Cooktop Cleaning
Creme
®
will protect the surface and make it easier
to remove food soil and water spots.
• The glass ceramic cooking surface is a durable
material resistant to impact but not unbreakable
if a pan or other object is dropped on it.
• Do not use aluminum foil directly on the glass; it
will melt and damage the glass surface.
• Do not allow plastic, paper, or cloth to come in
contact with the hot glass surface; these items can
melt or burn and damage the glass surface.
• Do not allow pans to boil dry. This can damage
the pan, element and/or the cooktop.
• Never cook food directly on the glass.
• Avoid placing a wok support ring, trivet or other
metal stand on the glass surface.
• Do not use the glass surface as a cutting board.
• Do not slide cookware across the cooking surface;
it may scratch the glass.
• Do not place wet pans on the glass surface.
BEFORE USING THE COOKTOP
FOR THE FIRST TIME
Cooktop Operating Instructions
Element “ON” Indicator Light
The element “ON” indicator light glows whenever any
element is turned on. The light remains lit until all of
the elements are turned off.
The “ON” light is located to the left of the Power Pad.
Hot Surface Indicator Light
Each element features a hot indicator light to show
when the cooking surface is too hot to touch. After
the element is turned off, an “H” will appear in the
element display. The H remains on until the cooking
area has cooled to a safe-to-touch temperature.
If an H is lit inside the element display, use caution
when working or cleaning around the cooktop as the
cooktop is still hot.
RETAINED HEAT
The glass cooking surface retains heat and stays hot
after the element(s) have been turned off. The retained
heat may be used to hold foods at serving temperatures
for a short time.
Cooktop Operating Instructions
INDICATOR LIGHTS
LOCKING THE COOKTOP
The Panel Lock is selected to prevent the control pads
from being turned on. Touch PANEL LOCK Pad, light
flashes and beep sounds. Hold for 3 seconds to activate.
A beep will sound and the panel lock light stays lit
indicating that the cooktop is locked.
To unlock, touch PANEL LOCK Pad and hold for 3
seconds. A beep will sound and the light will go out
indicating the cooktop is unlocked.
The cooktop cannot be locked when a surface element
is operating.
It is recommended to lock the cooktop when not in
use and for cleaning.
PAN
SIZE
PANEL
LOCK
POWE
R
1
9
8
7
6
5
4
3
2
KEEP
WARM
The element “ON” indicator light
Hot indicator lights
H
H
H
PAGE 8