Thermador PCS366 Cooktop User Manual


 
WOK OPERATION
SECTION FIVE: USING THE WOK
WOK ASSEMBLY
1. Remove all packaging materials and temporary
labels from the wok pan.
2. Make sure that the plastic ties used for shipping
have been removed.
Trivet
Flat Bottom Pot
Wok
Support
Ring
(attached to
cooktop)
WOK TRIVET
3. Check that the support ring is properly placed
above the burner.
4. Place wok pan into support ring before turning on
the burner.
5. Turn the control knob to the LITE position. After
45 to 60 seconds, turn to the heat setting.
6. It is normal for the wok pan to discolor and darken
with use. This indicates that it is well seasoned.
Use the trivet to support a flat-bottom wok or a
large stockpot.
Assemble as shown in the drawing above.
Wok
Support
Ring
(attached to
cooktop)
21-
3
/4
( 552 mm)
12-
3
/4"
(324 mm)
5"
(127 mm)
Page 23