Filter
Top Products
14
The backguard must be attached before sliding the
range into the final installed position. A Low Back or
Pot and Pan Shelf must be installed when there is less
than a 12" clearance between combustibles and the
back of the range above the cooking surface. (See
Fig. 2A and 2B on Page 5).
An Island Trim is available for covering the backguard
mounting flanges for island installations, where there
is a minimum of 12" of horizontal clearance between
combustibles and the back of the range. (See Fig. 2B
on Page 5).
The backguard is inserted, as shown in Fig. 8, into the
guide channels on the back of the range. Secure the
backguard with the (4) sheet metal screws provided.
Step 7: Backguard Installation
Chart C: Backguard Kit Model Numbers
Model Width 9" Std. Low Back 12" Low Back 22" Pot and Pan Shelf 3-3/4" Island Trim
30" Included N/A HS30R IT30R
36" N/A LB36R HS36R IT36R
48" N/A LB48R HS48R IT48R
➤
Backguard
Installed
Front of Unit
FIG. 8