Filter
Top Products
12-Speed Blender Chopper Combo Use and Care Guide
10.
Care And Cleaning: Blender
1. Press the ON/OFF switch to the OFF position (O) and unplug
the appliance.
2. Grasp glass blending jar handle and lift glass blending jar from the
blender motor housing. Rinse with water to remove any large food
particles that may have accumulated in the glass blending jar.
3. Insert glass blending jar aligning the notches and grooves on
collar until it fits securely into the blender motor housing.
4. Add 1
1
⁄
2
cups warm, soapy water to the glass blending jar and
cover with the cover assembly.
5. Plug into 120 V ~ 60 Hz AC outlet. Press the ON/OFF switch to
the ON position (I).
6. Press the HIGH button and then press the LIQUEFY button for a
few seconds.
7. Press the STOP button to stop the cleaning process. Turn the
ON/OFF switch to the OFF position (O) and unplug the
appliance.
8. Grasp glass blending jar handle and lift glass blending jar off of
the blender motor housing. Remove cover and assembly and
rinse glass blending jar with water. Repeat steps 1-7 as necessary.
9. Unscrew collar from glass blending jar and remove blade assembly.
CAUTION: BLADES ARE SHARP. HANDLE CAREFULLY.
CAUTION: NEVER PLACE BLENDER MOTOR HOUSING OR
GEAR BOX IN WATER OR OTHER LIQUIDS.
10. Immediately after each use, disassemble measuring cup, cover
assembly and blade assembly. Carefully wash all parts in warm soapy
water. Rinse and dry thoroughly. Do not wash parts in dishwasher.
11. Do not use a harsh abrasive on any part of the blender.
12. Clean the exterior of blender motor housing with a soft damp
cloth and dry.
13. Reassemble blade assembly onto glass blending jar. Place onto
blender motor housing with lid assembly. Spin dry on LIQUEFY
for 10 seconds. Remove cover assembly and store glass blending
jar inverted on motor housing, see Figure 9.
TMR_1135&1135CAN_IB_25-11-04 11/25/04 3:39 PM Page 10