Toastmaster 1135CAN Blender User Manual


 
2.
12-Speed Blender Chopper Combo Use and Care Guide
Always operate blender with cover in place.
The use of attachments, including canning jars, not recommended
or sold by Toastmaster, may cause fires, electrical shock or injury.
When processing hot liquids, remove measuring cup from the
two-piece cover.
Never add to chopper bowl while appliance is operating.
Chopper bowl or glass blending jar must be properly in place
before operating appliance.
Make sure chopper blades have come to a complete stop before
removing chopper lid.
Be certain chopper lid is securely locked into place before
operating appliance.
Do not attempt to defeat the lid interlock mechanism.
Be sure to insert or remove chopper blades by using chopper hub
to avoid injury.
SAVE THESE INSTRUCTIONS
CAUTION: A short power supply cord is provided to reduce the risk
of personal injury resulting from becoming entangled in or tripping
over a longer cord. Extension cords are available from local hardware
stores and may be used if care is exercised in their use. If an
extension cord is required, special care and caution is necessary. Also
the cord must be (1) marked with an electrical rating of 125 V. and at
least 10 A., 1250 W., and (2) the cord must be arranged so that it will
not drape over the countertop or tabletop where it can be pulled on by
children or tripped over accidentally.
POLARIZED PLUG: This appliance has a polarized plug, (one blade
is wider than the other). As a safety feature to reduce the risk of
electrical shock, this plug is intended to fit in a polarized outlet only
one way. If the plug does not fit fully in the outlet, reverse the plug. If
it still does not fit, contact a qualified electrician. Do not attempt to
defeat this safety feature.
ELECTRIC POWER: If the electric circuit is overloaded with other
appliances, your appliance may not operate properly. It should be
operated on a separate electrical circuit from other appliances.
This product is for household use only.
TMR_1135&1135CAN_IB_25-11-04 11/25/04 3:39 PM Page 2