11
OPERATION continued
CAUTION: DO NOT USE SCOURING POWDERS OR ABRASIVE PADS TO CLEAN
THE EXTERIOR AS THEY WILL SCRATCH AND MAR THE FINISH.
3. Interior Surfaces (Aluminized Steel)
a. Use a stiff non-metallic bristle brush to loosen food soil and crumbs. Let them fall to the oor
of the unit.
b. Wipe
or vacuum accumulated loose soil from the unit paying particular attention to areas around
heating elements.
c. Wash interior with a damp cloth or sponge wrung out of detergent and hot water solution.
d. Rinse with a damp cloth or sponge wrung out of hot clear water.
e. Dry with a clean cloth plus allow time to air dry.
CAUTION: BE CAREFUL NOT TO ALLOW WATER TO RUN INTO ELECTRICAL
COMPARTMENTS AS DAMAGED COULD RESULT.
I. Clean and Lubricate as Necessary
1. Drawer Carriages & Third Rail Members
a. Remove drawer by pulling drawer open until it stops, grasping the carriage on both sides and
pressing down on the tabs at the front of the third rail members and then removing drawer.
b. W
ash food residue from the carriage with hot detergent and water solution, rinse with clean
hot water and wipe dry.
IL2095
Fig. 3-3, Drawer Removal
Press down on tabs
here to remove drawer
CAUTION
CAUTION