Filter
Top Products
How to Chop Food
1. Attach the 8-Cup Processor Bowl to the
Food Processor Body by placing on Drive
Shaft. Turn 8-Cup Processor Bowl counter-
clockwise until it clicks into place. (See
Picture A on previous page)
2. Carefully place Chopping Blade on Drive
Shaft with the Chopping Blades sliding
down first. (See Picture G)
CAUTION: Use extreme care when handling the Blade. Always
insert or remove Blade by using the Hub. Do not touch the Blades
with your fingers. The Blades are very sharp and can cause injury if
touched.
3. Food should be cut into 1/2 to 1 inch pieces, before placing in
8-Cup Food Processor.
4. Place Lid with Food Chute so each Interlock Mechanism is to
the left of the Tabs. Press gently on the Lid, turning counter-
clockwise until you hear or feel the Latch lock. Do not force the
Interlock Mechanism. (See Pictures C & D)
5. Plug your 8-Cup Food Processor into a 120 V AC electrical
outlet.
6. Make sure Shield is down. This will keep food in the Food
Processor Bowl.
7. Set Speed Control to level 1.
8. For more power, slowly increase Speed Control from 1 to a
higher number or turn to OFF position and press Pulse Button.
(See Picture F)
9. After chopping food, move Speed Control Dial to OFF and
unplug unit.
10. Remove the Lid with Food Chute by turning it clockwise.
Carefully remove Chopping Blade from Drive Shaft. Grasp
handle of the 8-Cup Processor Bowl and turn clockwise to
remove.
11.Clean according to directions under User Maintenance.
Picture G
7
MJFP8W_RHFP8B_IB_10-4-07 4/12/07 3:10 PM Page 8