Filter
Top Products
- 15 -
3.1.3 Mounting method for the model provided one-person installation hook
The thickness of panel shall be 3.2 mm, consult nearest sales office for other thickness.
The mounting should be performed as described in Fig. 12 through Fig. 15.
Figure 12 Remove the panel mounting bolts
(M8 – 4 bolts and M4 – 2 pan-head screws).
Figure 13 Suspend the breaker using with
mounting hooks (2- locations) on panel,
and fix the breaker to panel by bolts (M8 –
2 bolts).
Figure 14 Fix the surface plate to panel with
bolts and screw (M8 – 4 bolts and M4 – 2
pan-head screws) removed at work of Fig. 12.
The tightening torque should be 11.8 to
14.7 N · m (120 to 150 kgf · cm) (at M8).
Figure 15 Fix the manual charging handle
with screw (M5 – 1 piece) referring the
tightening torque should be 2.94 to3.92 N · m
(30 to 40 kgf · cm).