Filter
Top Products
- 2 -
Equipment Warning Labels
DO NOT attempt to install, operate, perform maintenance, or dispose of this equipment until
you have read and understood all of the product labels and user directions that are contained
in this manual.
Warning labels that are attached to the equipment will include the exclamation mark within a
triangle.
DO NOT remove or cover any of these labels. If the labels are damaged or if additional labels
are required, contact the Toshiba Customer Support Center.
Labels attached to the equipment are there to provide useful information or to indicate an
imminently hazardous situation that may result in serious injury, severe property and
equipment damage, or loss of life if safe procedures or methods are not followed as outlined
in this manual.
Qualified Personnel
Installation, operation, and maintenance shall be performed by Qualified Personnel ONLY.
A Qualified Person is one that has the skills and knowledge relating to the construction,
installation, operation, and maintenance of the electrical equipment and has received safety
training on the hazards involved (Refer to the latest edition of NFPA 70E for additional safety
requirements).
Qualified Personnel shall:
• Have carefully read the entire manual.
• Be familiar with the construction and function of the ASD, the equipment being driven, and
the hazards involved.
• Be able to recognize and properly address hazards associated with the application of
motor-driven equipment.
• Be trained and authorized to safely energize, de-energize, ground, lock-out/tag-out circuits
and equipment, and clear faults in accordance with established safety practices.
• Be trained in the proper care and use of protective equipment such as safety shoes, rubber
gloves, hard hats, safety glasses, face shields, flash clothing, etc., in accordance with
established safety practices.
For further information on workplace safety, visit www.osha.gov.