True Manufacturing Company T-23DT Refrigerator User Manual


 
............ www.truemfg.com ............
True Food Service Equipment, Inc.
3
3
WARNING!
SAFETY INFORMATION
The power cord of this appliance is equipped with a
grounding plug which mates with a standard grounding wall
outlet to minimize the possibility of electric shock hazard from
this appliance.
Have the wall outlet and circuit checked by a qualified
electrician to make sure the outlet is properly grounded.
If the outlet is a standard 2-prong outlet, it is your personal
responsibility and obligation to have it replaced with the
properly grounded wall outlet.
The refrigerator should always be plugged into it’s own
individual electrical circuit, which has a voltage rating that
matches the rating plate.
This provides the best performance and also prevents
overloading building wiring circuits which could cause a fire
hazard from overheated wires.
Never unplug your refrigerator by pulling on the power cord.
Always grip plug firmly and pull straight out from the outlet.
Repair or replace immediately all power cords that have
become frayed or otherwise damaged. Do not use a cord that
shows cracks or abrasion damage along its length or at either
end.
When removing the refrigerator away from the wall, be
careful not to roll over or damage the power cord.
HOW TO CONNECT ELECTRICITY
Do not, under any circumstances, cut or remove the ground prong from the power cord.
For personal safety, this appliance must be properly grounded.
USE OF ADAPTER PLUGS
NEVER USE AN ADAPTER PLUG! Because of potential safety hazards under certain conditions,
we strongly recommend against the use of an adapter plug.
TRUE uses these types of plugs. If you do not have
the right outlet have a certified electrician install
the correct power source.
(North America Use Only!)
NEMA plugs