Filter
Top Products
............ www.truemfg.com ............
True Food Service Equipment, Inc.
15
15
CANTILEVER SHELVING INSTALLATION:
Step 1
A. Install the shelf supports into the shelf standards
that are located in the rear corners of the cabinet.
(See photos A & B).
Shelf
Clip
Shelf
Shelf
Shelf
Standards
3 4 5
Flavor strip end view
Flavor strip install.
SHELVING INSTALLATION / OPERATION
INSTALLATION / OPERATION INSTRUCTIONS
SHELF INSTALLATION:
Step 1
A. Hook shelf clips onto shelf standards. (see shelf Install
illustration).
B. Position all four shelf clips equal in distance from the
floor for flat shelves.
Wire shelves are oriented so that cross support bars
are facing down.
Step 2
Place shelves on
shelf clips making
sure all corners
are seated properly.
NOTE
Do not load product
to where it would
over hang the shelf.
FLAVOR STRIP INSTALLATION
FLAVOR STRIP INSTALLATION:
A. Take the shelf and turn it around. The back of
the shelf should be facing out. (See image 1-2).
B. The flavor strip snaps onto the shelf with the
larger opening of the strip toward the bottom.
(See image 3-4).
C. After flavor strip is installed tags can be put into
the flavor strip. (See image 5).
1
2
Turn shelf around.
A
B
(shelf Install Illustration)