Filter
Top Products
............ www.truemfg.com ............
True Food Service Equipment, Inc.
16 16
MAINTENANCE, CARE & CLEANING
CLEANING THE CONDENSER COIL
When using electrical appliances, basic safety precautions should be followed, including the following
TOOLS REQUIRED:
• Phillips screwdriver
• Stiff bristle brush
• Adjustable wrench
• Vacuum
Step 1
Disconnect power to unit.
Step 2
Take off front lower grill assembly by removing
two (2) screws in lower corners.
Loosen screws holding the top pivot pins. Swing
grill up and remove frame hooks from pivot pins
at top of louver.
Step 3
Clean off accumulated dirt from condensing coil
with a stiff bristle brush.
Step 4
After brushing condenser coil vacuum dirt from
coil, and interior floor.
Step 5
Replace grill assembly.
Step 6
Connect unit to power and check to see if
condensing unit is running.
All True TAC Models are manufactured with
Reversing Condenser Fan Motors. This kind of
fan motor allows less dust and dirt to accumulate
onto the condenser coil. This reduces the
required cleaning time of the condenser coil and
allows for less expensive operating costs.
Step 1
Step 2