Filter
Top Products
............ www.truemfg.com ............
True Food Service Equipment, Inc.
8 8
MAINTENANCE, CARE & CLEANING
MAINTENANCE, CARE & CLEANING
CLEANING THE CONDENSER COIL
REQUIRED TOOLS
• Phillips Screwdriver
• Stiff Bristle Brush
• Adjustable Wrench
__________ STEP 1 ___________
Disconnect power to unit. Take off
lower grill assembly by first removing
temperature control knob by pulling
straight out. Remove phillips screws
at the bottom of the grill. Holding
grill at the bottom gently pull out and
down as shown. (see illus-
tration).
__________ STEP 2 ___________
Remove bolts anchoring compressor
assembly to frame rails and carefully
slide out. (tube connections are flex-
ible)
__________ STEP 3 ___________
Clean off accumulated dirt from con-
densing coil with a stiff bristle brush.
__________ STEP 4 ___________
Lift W.R. Board cover above fan at
plastic plugs and carefully clean con-
denser coil and fan blade.
__________ STEP 5 ___________
After brushing condenser coil vacuum
dirt from coil, and interior floor.
__________ STEP 6 ___________
Replace cardboard cover. Carefully
slide compressor assembly back into
position and replace bolts.
__________ STEP 7 ___________
Reinstall grill assembly onto unit.
Connect unit to power and check to
see if fan blade is turning.
®
®