U-Line 1175R Refrigerator User Manual


 
26 1115R, 1175R, 29R, 1175BEV
Troubleshooting - Models with an electronic display:
PROBLEM POSSIBLE CAUSE REMEDY
Electronic display is blank and
interior light is off with door open.
Unit is in blackout/Sabbath mode
(not Star K certified).
Exit blackout/Sabbath mode (not Star K certified)
(See OPERATION).
Electronic display is blank and
interior light is on with door open.
A display function has changed. Touch and hold the WARMER button and touch and
release the ON/OFF button three times, then release the
temperature button. The display should become visible.
Electronic display shows repeating,
randomly flashing symbols and
partial characters.
A factory control mode has been
inadvertently entered.
Touch and hold the warmer temperature button and
touch and release the LIGHT button three times, then
release the temperature button to exit the factory
control mode. The set-point temperature should now
be displayed.
Electronic display shows:
0, 1 to 16, or 99.
A factory control mode has been
inadvertently entered.
Repeatedly touch the WARMER button to advance any
number shown to 99 and touch and release the LIGHT
button. The set-point temperature should now be
displayed.
Electronic display shows one or
more of the following:
E1, E2, E4, E5, E6.
The unit is displaying an error code. Record the error code(s) displayed and call for service.
ULIN_016357_30087.fm Page 26 Tuesday, March 14, 2006 2:36 PM