2075DWRWC
28
Design
■
Features
■
Performance
INTERIOR LIGHTING (2075DWRWC)
The interior lighting can be controlled by the controller. Each time the light “ ” symbol is touched, the
lighting is scrolled through the following options:
Touch once – Both compartment lights on.
Touch twice – Top compartment light on.
Touch three times – Bottom compartment light on.
Touch four times – Both compartment lights off.
To enter the “black-out mode,” touch and hold “ ” for approximately 15 seconds, this will turn off both
display temperatures and the cabinet lights. The unit will continue to maintain the compartment set point
temperatures even though they are not displayed. If the light symbol is touched and held for 10 seconds,
the unit will come out of “black-out mode,” the set points will be displayed and the lighting function will
be in one of the four scrolled positions.
Note: When the unit is in “black-out mode,” the light will come on automatically if the drawer is
opened. If you do not want the lights to come on when the drawers are opened, the light bulbs
must be removed. Refer to Light Bulb Replacement.
A solid indicator light (LED dot) indicates a thermistor error in that drawer.