Filter
Top Products
SKU 45198 For technical questions, please call 1-800-444-3353. Page 2
SPECIFICATIONS TABLE
Weight 690 lb.
Capacity 6 Cubic Feet
Drum Diameter 28”
Pneumatic Wheel Diameter 12”
Barrel Pulley 14.5”
Gas Engine HP 7.5 HP
Gas Engine Pulley 3”
Gas Engine Speed 3,600 RPM
Drum Speeds
20 RPM (Low speed to keep cement from setting)
36 RPM (Maximum speed for heavy mixing)
Towing Speed
Less than 25 MPH
NOT TO BE TOWED ON PUBLIC ROADS OR HIGHWAYS.
SAVE THIS MANUAL
You will need this manual for the safety warnings and precautions, operating, mainte-
nance and cleaning procedures, parts list and assembly diagram. Keep your invoice
with this manual. Write the invoice number on the inside of the front cover. Keep
this manual and invoice in a safe and dry place for future reference.
SAFETY WARNINGS AND PRECAUTIONS
1. KEEP WORK AREA CLEAN. Cluttered work areas invite injuries.
2. KEEP CHILDREN AWAY FROM WORK AREA. Do not allow children to handle
this product and to play near product.
3. STORE IDLE EQUIPMENT. When not in use, tools and equipment should be
stored in a dry location to inhibit rust. Always lock up tools and equipment and
keep out of reach of children.
4. DO NOT USE THIS PRODUCT IF UNDER THE INFLUENCE OF ALCOHOL OR
DRUGS. Read warning labels on prescriptions to determine if your judgment or
reflexes are impaired while taking drugs. If there is any doubt, do not attempt to
use this tool.
5. USE EYE, HEARING, AND DUST PROTECTION. Wear ANSI-approved safety
impact eye glasses, ANSI-approved hearing protection, and ANSI-approved dust
protection when working with this product. ANSI-approved safety impact eye
glasses, hearing protectors, and dust protectors/respirators are available from
Harbor Freight Tools.
REV 05/06