Filter
Top Products
SKU 45198 For technical questions, please call 1-800-444-3353. Page 3
6. DRESS SAFELY. Nonskid footwear or safety shoes should be used when work-
ing with this product. Do not wear loose clothing or jewelry as they can become
caught in moving parts. Wear a protective hair covering to prevent long hair from
becoming caught in moving parts.
7. INDUSTRIAL APPLICATIONS MUST FOLLOW OSHA REQUIREMENTS.
8. DO NOT OVERREACH. Keep proper footing and balance at all times to prevent
tripping, falling, back injury, etcetera.
9. STAY ALERT. Watch what you are doing at all times. Use common sense. Do
not use this tool when you are tired or distracted from the job at hand.
10. CHECK FOR DAMAGED PARTS. Before using this product, carefully check that
this tool will operate properly and perform its intended function. Check for dam-
aged parts and any other conditions that may affect the operation of this tool.
Replace or repair damaged or worn parts immediately.
11. REPLACEMENT PARTS AND ACCESSORIES. When servicing, use only iden-
tical replacement parts. Only use accessories intended for use with this product.
Approved accessories are available from Harbor Freight Tools.
12. MAINTAIN THIS PRODUCT WITH CARE. Keep this tool clean and dry for better
and safer performance.
13. MAINTENANCE: For your safety, service and maintenance should be performed
regularly by a qualified technician.
14. USE THE RIGHT PRODUCT FOR THE RIGHT JOB. There are certain applica-
tions for which this product was designed. Do not use a small tool or attachment
to do the work of a larger industrial tool or attachment. Do not use this product
for a purpose for which it was not intended.
SPECIFIC PRODUCT WARNINGS AND PRECAUTIONS
1. NEVER PERFORM ANY SERVICES OR MAINTENANCE OR MOVE THE CE-
MENT MIXER WHILE IT IS RUNNING. BEFORE PERFORMING SERVICES,
MAINTENANCE, OR MOVING THE CEMENT MIXER, TURN OFF THE GAS
ENGINE (45) AND DISCONNECT THE SPARK PLUG WIRE TO PREVENT AC-
CIDENTAL STARTING.