Filter
Top Products
38
DEMONSTRATION MODE
To demonstrate, touch Clock, the number 0 and then touch Start/Touch On
pad and hold for 3 seconds.
DEMO ON DURING DEMO NO OVEN POWER
and
DEMO
will
appear in the display. Cooking operations and specific special features can
now be demonstrated with no power in the microwave oven. For example,
touch Add-A-Minute pad and the display will show
1.00
and count down
quickly to
END
.
To cancel, touch Clock, then the number 0 and Stop/Clear pads. If easier,
unplug the microwave oven from the electrical outlet and replug.
CLEANING AND CARE
Disconnect the power cord before cleaning or leave the door open to inactivate
the microwave oven during cleaning.
EXTERIOR
The outside surface is painted. Clean the outside with mild soap and water;
rinse and dry with a soft cloth. Do not use any type of household or abrasive
cleaner.
DOOR
Wipe the window on both sides with a damp cloth to remove any spills or
spatters. Metal parts will be easier to maintain if wiped frequently with a
damp cloth. Avoid the use of spray and other harsh cleaners as they may
stain, streak or dull the door surface.
TOUCH CONTROL PANEL
Care should be taken in cleaning the touch control panel. If the control panel
becomes soiled, open the microwave oven door before cleaning. Wipe the
panel with a cloth dampened slightly with water only. Dry with a soft cloth.
Do not scrub or use any sort of chemical cleaners. Close door and touch
Stop/Clear pad.
INTERIOR - AFTER MICROWAVE COOKING
Cleaning is easy because little heat is generated to the interior surfaces;
therefore, there is no baking and setting of spills or spattering. To clean
the interior surfaces, wipe with a soft cloth and warm water. DO NOT USE
ABRASIVE OR HARSH CLEANERS OR SCOURING PADS. For heavier soil,
use baking soda or a mild soap; rinse thoroughly with hot water. NEVER
SPRAY OVEN CLEANERS DIRECTLY ONTO ANY PART OF THE MICROWAVE
OVEN.