Filter
Top Products
17
Operation
16
Operation
The Water Dispenser
IMPORTANT: Dispense at least 1 qt (1 L) of water every week to
maintain a fresh supply.
To Dispense Water (Standard):
1. Press a sturdy glass against the water dispenser lever.
NOTE: While dispensing water and for 3 seconds after dispensing has
stopped, the digital display will show how much water has been
dispensed.
2. Remove the glass to stop dispensing.
To Dispense Water (Measured Fill):
Measured Fill allows you to dispense a specified amount of water with
the touch of a few buttons.
NOTE: The amount of water you select will be dispensed. Be sure that
the container is empty and can hold the entire volume. If ice is in the
container, you may need to adjust your selection.
1. Press MEASURED FILL to turn the feature on. When the feature is
on, the Measured Fill screen appears on the display.
Press ICE MODE to manually turn off the Measured Fill feature.
NOTE: The dispenser will automatically turn off Measured Fill after 1
minute of inactivity. When Measured Fill is turned off, any changes
you have made will be lost and all defaults will be restored.
Water and Ice Dispensers (cont.)
Water and Ice Dispensers (cont.)
2. You can dispense water by the ounce, cup, or liter. The default unit
is ounces. To switch to cups or liters, press the LIGHT button.
Default, minimum, and maximum volumes are listed below.
3. Press the LOCK and OPTIONS buttons to adjust the volume as
desired. The LOCK button increases the volume, and the OPTIONS
button lowers the volume.
NOTE: Most coffee cups (commonly 4 to 6 oz [118 to 177 mL] per
cup) are not the same size as a measuring cup (8 oz [237 mL]). You
may need to adjust the volume to avoid unintentionally overfilling
coffee cups.
4. To dispense water, press a sturdy glass against the water dispenser
lever OR place the glass below the water dispenser and press the
MEASURED FILL button.
NOTE: While dispensing water, the digital display will count down
how much water remains to be dispensed, according to the volume
you selected. The flow of water will automatically stop once the
desired volume has been dispensed.
5. To stop dispensing before the selected volume has been dispensed,
remove the glass from the dispenser lever OR press the MEASURED
FILL button a second time.
NOTE: If you stop dispensing before the desired volume has been
dispensed, the digital display will continue to show how much water
remains to be dispensed. The display will turn off after 1 minute of
inactivity.
• To select a new volume or start dispensing the same volume again,
you must first finish dispensing the selected volume, or turn off the
Measured Fill feature (either by waiting 1 minute so it will
automatically turn off or by pressing ICE MODE to manually turn it
off) and then turn it back on.
Units
Default Minimum Maximum
Ounces 8
1 28
Cups 1
1/4 16
Liters 0.25
0.05 4.00