Filter
Top Products
23
22
Operation
Operation
Baking
BAKE (Two-Element
Bake)
Full power heat is radiated
from the bake element in the
bottom of the oven cavity and
supplemental heat is radiated
from the broil element. This
function is recommended for
single rack baking. Many
cookbooks contain recipes to
be cooked in the conventional
manner. Conventional baking/ roasting is particularly suitable for dishes
that require a high temperature. Use this setting for baking, roasting,
and casseroles.
CONV BAKE
(Convection Bake)
The bottom element operates
at full power, and the top broil
element operates at
supplemental power. The
heated air is circulated by the
motorized fan in the rear of the
oven providing a more even
heat distribution. This even
circulation of air equalizes the temperature throughout the oven cavity
and eliminates the hot and cold spots found in conventional ovens. A
major benefit of convection baking is the ability to prepare food in
quantity using multiple racks—a feature not possible in a standard
oven.
When roasting using this setting, cool air is quickly replaced, searing
meats on the outside and retaining more juices and natural flavor on
the inside with less shrinkage. With this heating method, foods can be
baked and roasted at the same time with minimal taste transfer, even
when different dishes are involved, such as cakes, fish or meat. The hot
air system is especially economical when thawing frozen food. Use this
setting for baking and roasting.
two-element bake
convection bake
TRU CONV (TruConvec™)
The rear element only operates
at full power. There is no direct
heat from the bottom or top
elements. The motorized fan in
the rear of the oven circulates
air in the oven cavity for even
heating. Use this setting for
foods that require gentle
cooking such as pastries,
souffles, yeast breads, quick
breads and cakes. Breads, cookies, and other baked goods come out
evenly textured with golden crusts. No special bakeware is required.
Use this function for single rack baking, multiple rack baking, roasting,
and preparation of complete meals. This setting is also recommended
when baking large quantities of baked goods at one time.
Baking Tips
• Make sure the oven racks are in the desired positions before turning
the oven on.
•
DO NOT open the oven door frequently during baking. If you must
open the door, the best time is during the last quarter of the baking
time.
• Bake to shortest time suggested and check for doneness before
adding more time. For baked goods, a stainless steel knife placed in
the center of the product should come clean when done.
• Use the pan size and type recommended by the recipe to ensure
best results. Cakes, quick breads, muffins, and cookies should be
baked in shiny, reflective pans for light, golden crusts. Avoid the use
of old, darkened pans. Warped, dented, stainless steel and tin-
coated pans heat unevenly and will not give uniform baking results.
TruConvec™
Baking