Filter
Top Products
4544
Product Care
WARNING
ELECTRICAL SHOCK HAZARD
Disconnect the electric power at the main fuse or
circuit breaker before replacing bulb.
Replacing Oven Lights
CAUTION
To avoid risk of personal injury, DO NOT touch bulb with
bare hands. Clean off any signs of oil from the bulb and
handle with a soft cloth.
1. Unsnap glass light cover
using a screwdriver in the
access groove.
2. Firmly grasp light bulb and
pull out.
3. Replace with halogen bulb
using volt and wattage
requirements listed on glass
cover.
4. Replace the light cover by
snapping glass cover onto
metal box.
5. Reconnect power at the main
fuse or circuit breaker.
access
groove
light
bulb
glass light
cover
Product Care
Door Removal
1
2
3
4
Open door completely.
Place pin in pin hole.
Remove hinge trim screws
and hinge trim.
Close until pins stop door.
Lift door up and out.
WARNING
TO PREVENT
PERSONAL INJURY
Before removing the doors,
make sure the pins are
properly installed in the
hinges. Failure to do so can
result in personal injury to
hands and/or fingers.