Filter
Top Products
18 19
Product Controls
Clocks and Timers (Digital Display)
3. Set the Oven Function selector to the desired function –
BAKE, CONVECTION BAKE, OR TRUCONVEC, etc.
4. Set the temperature control knob to the desired baking
temperature.
5. The automatic time bake program is now set!
NOTE: The display will continue to show the amount of bake
time that was programmed (this will remain until the programm
ed start time is reached). You can return the display to clock
mode by pressing the “CLOCK/PROBE” button – Notice that a
small clock will be displayed in the upper right corner to indicate
that a program is in progress. Switch back to the timer mode by
pressing the “BAKE HOURS” button.
6. When the specified time is reached, the oven will automatically
turn on. It will bake for the programmed amount of time at the
selected temperature.
NOTE: At one minute from the end of the specified bake
program, the oven timer will beep once. At the end of the
specified bake program, the oven will automatically turn off and
the timer will sound a series of three beeps. This will continue
until the “START TIME” button is pressed. The display will then
return to displaying the time.
NOTE: Setting the remaining duration time to :00 will cancel the
Automatic Bake program.
Product Controls
Clocks and Timers (Analog Clock)
Synchronizing the Analog and
Digital Clocks
(Premiere Models)
1. Press the “timer” and “start time”
buttons simultaneously.
2. Turn the “Set” knob to move the
hands on the analog clock to any
time setting.
3. After five seconds the display will
go blank. Press the “timer” button
and using the “Set” knob, set the digital time to the exact time on
the analog clock.
This will synchronize the two clocks. You can now set the time of day.
Setting the Min/Sec Timer
The Min/Sec Timer is designed for accurate timing and is ideal for
baking delicate items such as biscuits, cookies, and popovers, and for
precise broiling. The Min/Sec timer can be used at the same time the
Bake Hours or Start Time functions are in use. It can be used for timing
up to 24 hours.
To program the Min/SecTimer
1. Push and release the “timer” button.
2. Rotate “Set” knob until desired duration of time is displayed. Timer
starts seconds after “Set” knob stops rotating. A tone indicates the
timer has started.
When the timer has one minute remaining, the timer will sound twice
and begin to countdown by seconds. A tone will sound three times
indicating the time is complete and twice every ten seconds after
completion until timer function is cleared.
Note: Press any function button to clear a completed cycle or
function.
bake
hours
timer
start
time
probe
temp
Set