Filter
Top Products
LAYOUT AND LOADING RECOMMENDATIONS
Each shelf can be used as a storage, presentation or sliding shelf. Each of
your wine cabinet’s shelves has 13 recesses for bottles thus enabling you to
place your bottles in total safety. Also, your shelves all have a label slot,
designed to receive the pre-cut cards delivered with your cabinet, thus
helping you to identify the position of your favorite wines at a glance.
Shelf in storage version configuration:
To place bottles on a storage shelf:
- Install the shelf in the selected location.
- Place a wooden locking pin in each of the two
holes located on the right and left of the upper
face approximately 15 cm in front of the shelf:
these pins butt up against the heat shaped wall
and avoid all accidental shelf movement (See
diagram).
- Start by placing the bottles in the rear recesses
with the base of the bottle towards the back.
- Continue by placing the bottles in the front
recesses, facing them in the opposite direction.
- Continue stacking the bottles in this way
making sure that no bottle touches the rear wall.
- A storage shelf can hold a maximum of 6
layers, each of 13 bottles, this representing
78 "Standard" Bordeaux bottles (100kg).
Shelf in presentation version configuration:
To place bottles on a presentation shelf:
- Install the shelf in the selected location.
- Place a wooden locking pin in each of the two
holes located on the right and left of the upper
face approximately 15cm in front of the shelf:
these pins butt up against the heat shaped wall
and avoid all accidental shelf movement (See
diagram).
- Start by placing the bottles in the rear recesses
with the base of the bottles towards the back (6
"Standard" Bordeaux bottles).
- Continue stacking the bottles on the rear
recesses (7+6+7+6 = 26 "Standard" Bordeaux
bottles) making sure that no bottle touches the
rear wall.
- To present the bottles, place them in an upright
position on the front of the shelf (Maximum
capacity: 6 "Traditional" Bordeaux bottles).
7
WWW.VINOTEMP.COM