Filter
Top Products
7
Lid Cap
2-Part Lid
Lid Flaps
2 L/64 oz. Container
Blade Assembly
Retainer Nut
Centering Pad
Drive Socket
Pulse Function
Start/Stop
3 Programmes & Variable
Speed Control
Motor Base
Feet
Tamper
On/Off Switch: The On/Off (or Power) Switch
is on the front of the machine base. The On/Off
Switch controls the power to the machine.
Start/Stop Switch: Pressing down on the
Start/Stop Switch will initiate the blending
process. Pressing down on the Start/Stop
Switch again will stop the blending process.
Variable Speed Dial: The centre
Variable Speed Dial serves two functions:
the use of three programmes or the use of
ten Variable Speed settings.
Pulse Switch ( ): The Pulse Switch can be
used when using Variable Speeds
or Programmes.
Container: Millilitres, ounces and cups are
clearly marked.
CAUTION: Lids and tampers are not
interchangeable between different
container styles, types and sizes.
2-Part Lid: The 2-part Lid is easy to put on
and take off, and easy to clean. Always use
the lid and the lid cap when the machine is
in operation.
Snap the lid onto the container and leave in
place for a few minutes. Once the lid has been
left on the container, it will be much easier to
lock or remove.
Lid Cap: Insert through the lid and secure by
turning clockwise. Remove the lid cap to use
the tamper or to add ingredients.
PARTS AND FEATURES
Tamper: The tamper allows you to accelerate the process of very thick and/or frozen mixtures that cannot
be processed in a standard blender. Using the tamper maintains circulation by preventing air pockets from
forming during blending.