Filter
Top Products
11
Resetting the Pre-Set Buttons
to the original factory settings
1. Access the Owner Controls by activating the power switch located on
the back of the motor base while depressing button 2.
2. Once the unit powers up, it will cycle through three screens then stop on the motor
status screen. Depress button 2 again, within 12 seconds, to scroll through the
menu settings.
3. Scroll using button 2. The screen will display “1 TO OVERWRITE CURRENT
PROGRAM”. Depress button 1 to reset to the original factory settings.
IMPORTANT NOTES!
Programming Chip: If the above programming steps are taken and the custom
programming does not appear with the first blend cycle, turn the chip 180˚
(side-to-side) and try again.