Filter
Top Products
— 6 —
CONTROLS —
Control Guide
1ERD SERIES
— Power switch; for turning the fryer on or off. (Power switch is located behind the door panel.)
— For cleaning purposes when the fryer is filled with water. Temperature is maintained at
approximately 192°F (89°C).**
— For entering and exiting the program mode. For scrolling through program parameters.
— Starts and stops the timer; Silences the alarm after the timer times out; For entering
temperature and time values in the program mode.
— Starts and stops the timer; Silences the alarm after the timer times out; For entering
temperature and time values in the program mode.
— For viewing actual shortening temperature and set temperature.
**NOTE: The boil button is used during cleaning for the boil out. Depressing this button will set the
thermostat to a simmer point of 198°F. Note that there is a special feature in the controller that will sense
water verses oil and automatically send the controller into the boil out mode when water is placed into the
vat.