Filter
Top Products
— 5 —
GR SERIES GAS FRYERS
INTRODUCTION
GENERAL
Vulcan Fryers are produced with quality
workmanship and material. Proper installation,
usage and maintenance will result in many
years of satisfactory performance.
Before installing the fryer, thoroughly read this
manual and carefully follow all instructions in
the order given.
This manual is applicable to models listed on
the cover page. Procedures in this manual will
apply to all models unless specified. Pictures
and illustrations can be of any model unless the
picture or illustration needs to be model-specific.
Note: For units equipped with KleenScreen™,
refer to the KleenScreen™ Interplumbed
Filtration System User’s Guide and the
supplemental KleenScreen™ instructions
supplied with the fryer battery.
IN CASE SERVICE IS NEEDED
In case service is needed, have the following
information filled in by the Vulcan Authorized
Service Technician who installed this
equipment. Also, you may wish to note this
information on the front cover so it would be
more easily noticed.
Authorized Service Technician
Phone
To locate the closest authorized service
agency, go to www.hobartservice.com and
click on locations. Enter your zip code for
service center information.
You may also call 1-888-4HOBART.
ORDERING PARTS
Customers may order parts directly from their
local authorized service center. If not known,
call Vulcan Customer Service at 800-814-7028.
To speed up your order, provide the model number,
serial number, gas type, part needed, item part
number (if known), and quantity needed.
FRYER CAPACITIES
# of Width Shortening,
Model Heat Tubes BTU/hr Total MJ inch (cm) lbs (kg)
35 3 90K 95.00 15.5 (39) 35-40 (16-18
45 4 120K 126.60 15.5 (39) 45-50 (20-23)
65 5 150K 158.25 21 (53) 65-75 (29-34)
85 5 150K 158.25 21 (53) 85-95 (39-43)