Filter
Top Products
46
3. Install new switch by reversing steps 1-3.
REMOVAL OF BASKET LIFT CAM
1. Follow steps 1-6 under Removal of Basket Lift Back.
2. With a
1
⁄2" wrench or socket, remove the lift bar and cam assembly holding nut. (Fig. 71)
Fig. 71
3. With an allen wrench loosen the cam set screw. (Fig. 72)
Note: When reassembling make sure wires do not tangle in cam.
Fig. 72
4. With an off set flat blade screwdriver, remove screws mounting the cam to the lift bar. (Fig. 71)
5. Pull cam from the appliance. Install new cam by reversing steps 1-5.