Vulcan-Hart ECO4S ML-52501 Convection Oven User Manual


 
13
Gentle Bake Button
Selects the gentle bake time setting. A roast time must be set first. The gentle bake time can
then be set equal to or less than the roast time. The gentle bake time will be the portion of roast
time to operate in the gentle bake mode. Gentle bake mode will start first. When gentle bake time
elapses, the remainder of the roast time will be in the non-gentle bake mode.
Use when cooking delicate product, such as strudel, muffins, cupcakes, meringue pies, etc., to
keep product from forming "waves" on the top.
Use the Gentle Bake Button to switch between the selection of gentle bake mode and no
gentle bake mode time setting. A gentle bake mode time of zero means no gentle bake mode will
occur.
The light in the Gentle Bake Button will be lit when in the gentle bake mode.
In Gentle Bake Mode:
1. The fan cycles (45 seconds ON and 45 seconds OFF) for the duration of the gentle
bake cycle time.
2. The fan stays on while the heat cycles in hold mode.
3. The fan stays on while heat cycles at 100% power when not timing.
4. Can be switched at any time.
Stop/Start Button
1. Initiates timing a product in the mode selected if a cook time has been set.
2. Stops timing of a product if a timing sequence has already started.
Hold Button
Selects Hold mode.
1. Allows selection of hold temperature.
2. Temperature indication of ---°F (---°C) indicates no hold mode.
Hold Button Light
Is lit when in the Hold mode.
1. When not timing, allows setting/enabling a hold mode setting of ---°F (---°C),
meaning no hold will take effect.
2. Any other temperature means that when the actual cook time has ended, the oven
will enter the Hold mode and use the hold temperature.