Filter
Top Products
– 20 –
FORM 30975 Rev. C (Aug. 2000) PRINTED IN U.S.A.
MAINTENANCE
WARNING: THE OVEN AND ITS PARTS ARE HOT. USE CARE WHEN OPERATING, CLEANING,
OR PERFORMING ANY MAINTENANCE.
WARNING: DISCONNECT THE ELECTRICAL POWER SUPPLY AND PLACE A TAG AT THE
DISCONNECT SWITCH INDICATING THAT YOU ARE WORKING ON THE OVEN BEFORE
PERFORMING ANY MAINTENANCE .
LUBRICATION
The fan motor comes with sealed bearings and requires no lubrication.
The door hinges and mechanism require occasional lubrication with mineral oil.
DISCONNECTING THE GAS LINE RESTRAINT
If this oven is placed on casters, it should be connected to the supply piping with the proper disconnect
device and restraint. If it is necessary to disconnect the restraint, first turn off the gas supply. Reconnect
the restraint before turning the gas supply on and returning the oven to its original installed position.
VENT
Annually check the flue, when cool, to be sure it is free of obstructions.
TROUBLESHOOTING
If the NO IGNITION LIGHT remains lit for more than 20 seconds after three trials (Model GCO2D), or
if E-05 displays after three trials (Model GCO2C):
• Turn oven off for 5 minutes before attempting to re-light.
• Check gas supply valves to be sure they are open.
• Check electrical power source and connections.
• Call your local Vulcan authorized service representative.
SERVICE AND PARTS INFORMATION
To obtain service and parts information concerning this oven, contact the Vulcan-Hart Service Agency
in your area (refer to listing supplied with the oven), or Vulcan-Hart Company Service Department at
the address or phone number shown on the front cover of this manual.