Filter
Top Products
— 13 —
5. Tighten all bolts and nuts firmly (do not overtighten), with
7
/16 wrench, in numerical order as shown
in the diagram (Fig. 7). CAUTION: Overtightening can deform the aluminum material of the
platen.
The holes in the platen surface and the heads on the special bolts are eccentric. Make sure the
head of each bolt fits into the hole in the platen surface and stays there until the nut is finger
tightened.
6. Reinstall platen cover (Fig. 8)
Fig. 7 Fig. 8
SERVICE AND PARTS INFORMATION
To obtain service and parts information concerning this duplex cooker, contact the Vulcan-Hart Service
Agency in your area (refer to listing supplied with the duplex cooker), or Vulcan-Hart Company Service
Department at the address or phone number shown on the front cover of this manual.