Vulcan-Hart GPC12 Pasta Maker User Manual


 
– 13 –
Fig. 10
USING THE PASTA COOKER
The tank warranty may be voided by improper operation. Turn the power switch
OFF when draining
or filling the pasta cooker.
CAUTION: Before turning the pasta cooker on, the tank must be filled with water. If this is not
done, the tank walls can be damaged. Warpage can cause leaks.
Turning the Pasta Cooker ON
1. Fill the pasta cooker tank to the water fill level line on the back wall, which is approximately
5" (127 mm) above the tank tubes (Fig. 10). The manual fill valve(s) are located on the front
control panel.
a. Turn handle counterclockwise to open and clockwise to close to operate.
b. Do not overfill tank.
c. Add water as needed.
Fig. 9
FILL LEVEL
PL-51431