Filter
Top Products
— 44 —
CONVECTION OVEN MOTOR AND DOOR SWITCH CHECK,
REPLACEMENT (Cont.)
7. Remove fan wheel cover.
8. Remove (4)
1
/4-20 hex head nuts securing motor mount plate to rear oven cavity (Fig. 55).
11. Disconnect conduit wire connector from motor assembly (Fig. 59).
9. Pull motor assembly forward through oven cavity and away from rear cavity wall (Fig. 56).
10. Remove conduit box cover and disconnect all wiring (note wiring for reassembly) (Fig’s. 57 & 58).
Fig. 57
Fig. 58
Fig. 55
Fig. 56