Filter
Top Products
— 5 —
ELECTRICAL DATA
ledoMesahP
V802V042V084
WKpmAWKpmAWKpmA
53SRTEV3810.05813.34816.12
1. Remove the control box cover plate. Mount suitable 1
23
⁄32" (43.6mm) conduit fitting in knockout
opening.
2. Connect field wire to the terminal block as indicated on the wiring diagram. The wiring diagram is
located inside the wiring compartment at the rear of the tilting skillet. Wire must be of the type
suitable for 90°C service.
3. After making the connections, replace the control box cover plate.
4. The tilting skillet must be grounded by installing a ground lead to the ground lug located inside the
junction box.
SERVICE CONNECTIONS