Filter
Top Products
- 5 -
TROUBLESHOOTING
PROBLEM POSSIBLE CAUSES
Cold water flowing continuously into Either or both solenoid valves are not closing when the steamer
drain during shutdown. is OFF. Contact your Vulcan-Hart authorized servicer or Vulcan-
Hart Company, Louisville, KY (phone number is listed on the
front of this manual).
Water overflowing into cooking Problem with operating probe caused by either:
compartment.
1. Short between probe terminal and body of steamer. Contact
your Vulcan-Hart authorized servicer or Vulcan-Hart Company
,
Louisville, KY (phone number is listed on the front of this
manual).
2.
Excessive scale build-up on probe. Contact your Vulcan-
Hart authorized servicer or Vulcan-Hart Company, Louisville,
KY
(phone number is listed on the front of this manual). Have
water
quality analyzed and corrected immediately to avoid
damage to steamer.
Heater elements do not come on.
Problem with contactors or thermostat coated with scalant. Contact
your Vulcan-Hart authorized servicer or Vulcan-Hart Company,
Louisville, KY (phone number is listed on the front of this manual).
Have water quality analyzed and corrected immediately to avoid
damage to steamer.