Filter
Top Products
ELECTRICAL OPERATION
COMPONENT FUNCTION
Infinite Load Switch ... Two switches independently control the left and right heating elements on 208V and 240V
models. Depending on switch setting, provides a range of ON time from 7% to 100%.
3 Heat, 4 Position
Switch ...............
Two switches independently control the left and right heating elements on 480 volt
models. Provides approximately 100% of total available power of 4.5 KW with both
switches set to HI position, 50% at MED position, 25% at LO position, and 0% at the OFF
position.
Heating Element
Assemblies ..........
Provides heat for broiling food product. There are 2 element assemblies per broiler.
Terminal Block ....... Provides connections for supply voltage to the broiler.
SEQUENCE OF OPERATION
NOTE: On 208V/240V broilers, the two heat controls are Infinite load switches; On 480V broilers, the two heat
controls are 4 Position 3 Heat switches.
1. Conditions
A. Broiler connected to correct supply voltage.
B. Building circuit breakers ON (power to machine).
C. Broiler heat control switches are OFF.
D. Broiler at room temperature.
2. Broiler heat control switches are turned to desired heat setting.
A. Power to heating elements.
3. Broiler heat control switches reach desired heat setting.
A. Power removed from heating elements.
4. Broiler heat control switches drop below desired heat setting.
A. Broiler heat control switches will continue to cycle until turned to OFF or power is removed from broiler.
SALAMANDER ELECTRIC BROILER - ELECTRICAL OPERATION
Page 11 of 14 F45545 (0315)