Filter
Top Products
RIGHT SIDE PANEL
Disconnect the
electrical power to the machine and
follow lockout / tagout procedures.
1. Remove crumb tray.
2. Remove FRONT PANEL.
3. Remove screws securing plate stop to broiler.
Fig. 4
4. Pull knob off the handle on rack positioning
bracket then remove plate stop.
5. Position the rack assembly to access panel
screws in the broiler opening area. Remove
screws from this area and the front of panel.
Fig. 5
6. Remove screws securing right side panel to
broiler. Slide panel toward the front of broiler until
panel clears front mounting area then remove the
panel.
Fig. 6
7. Reverse procedure to install.
INFINITE SWITCH / 3 HEAT SWITCH
Disconnect the
electrical power to the machine and
follow lockout / tagout procedures.
1. Remove knob from switch.
SALAMANDER ELECTRIC BROILER - REMOVAL AND REPLACEMENT OF PARTS
F45545 (0315) Page 6 of 14