Filter
Top Products
Fig. 10
4. Grasp the rack assembly near the broiler, rotate
both the rack stops horizontally and pull the rack
assembly out enough for the rack assembly
frame to clear the rack stops.
Fig. 11
5. Grasp the rack assembly and drip tray on each
side to support the tray and remove from broiler.
Fig. 12
6. From inside broiler cooking area, remove screws
securing heating element to broiler.
Fig. 13
7. Note wire locations and disconnect wires from
heating element.
Fig. 14
8. Reverse procedure to install.
9. Check for proper operation.
SALAMANDER ELECTRIC BROILER - REMOVAL AND REPLACEMENT OF PARTS
F45545 (0315) Page 8 of 14