Waring MBB Blender User Manual


 
14. When blending hot liquids, remove center piece
of two-piece cover. Begin processing with only one
cup (8 oz.). Always begin processing at the lowest
speed setting. Keep hands and other exposed skin
away from the lid opening to prevent possible burns.
See Hot Blending instructions, next page.
15. Screw on container bottom firmly. Injury can result if
moving blades accidentally become exposed.
16. Do not leave blender unattended while it is running.
SAVE THESE INSTRUCTIONS
GROUNDING INSTRUCTIONS
For your protection, Waring Blenders are equipped
with a 3-conductor cordset that has a molded 3-prong
grounding-type plug, and should be used in combination
with a properly connected grounding-type outlet as shown
in Figure A. If a grounding-type outlet is not available, an
adapter, shown in Figure B, may be obtained so that a
2-slot wall outlet can be used with a 3-prong plug.
Referring to Figure C, the adapter must be grounded by
attaching its grounding lug under the screw of the outlet
cover plate. CAUTION: Before using an adapter, it must
be determined that the outlet cover plate screw is properly
grounded. If in doubt, consult a licensed electrician. Never
use an adapter unless you are sure it is properly grounded.
Note: Use of an adapter is not permitted in Canada.
3