Waring MBB Blender User Manual


 
5. CAUTION: To avoid damage to your blender, do not run
the blender if the blades become blocked or jammed
during use. Turn the blender off immediately, remove
the container from the blender base and dislodge the
material that is blocking or jamming the blade.
HOW TO ASSEMBLE CONTAINERS WITH
REMOVABLE BLADES
1. Before starting, make sure that the blender cord is
unplugged and that the switch is in the off position.
2. Refer to Figure 1. The following
points are important to note when
putting together the container
assembly:
3. Container gasket must be
between the blade assembly
and the container.
4. Container collar must not be
misthreaded onto the container.
5. Container collar must be securely
tightened onto the container
before placing food or liquid in
the container.
6. Tighten the container collar by holding the container
upside down and turning the container collar
counterclockwise.
7. Place container assembly on unit base so that it is
firmly seated and not tilted to one side. Never place the
container collar or the blade assembly on the unit base
unless the container has been completely assembled
and securely tightened.
5
Collar
To Tighten
Fig.1